Black Box IC108A Przewodnik Instalacji Pobierz pdf (Strona 14)

ISC Communications

156 —

revision 1

2. Start HyperTerminal. The Connection Description window will open with the “New Connection”

setting. (Choose New Connection from the File menu if the Connection Description window does not

open).

3. In the Name field, type COBOX and click [OK].

4. Select Direct Connect and choose the COM port to which the cable is connected on the computer.

5. Change the Communication settings to: 9600 Baud, 8 data bits, 1 stop bit, and No Parity.

6. Once in Terminal mode, hold down the <x> key on the keyboard and plug in power to the CoBox

device. The following will appear on the screen (version and serial numbers may be different):

7. Press <Enter> to go into the CoBox device’s setup mode. The CoBox device’s current configuration

will be displayed. It will look similar to the following:

8. Type 0 and then press the <Enter> key to enter the basic setup for the CoBox device.

9. Enter the IP address for the CoBox device in the form of 10.11.12.13. The currently configured address

will appear as you get to each part of the IP address as you are typing; just continue to type the new

number.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 34 35

Brak uwag

Black Box IC108A Przewodnik Instalacji Strona 14