Black Box Wizard IP Plus ServSwitchTM Podręcznik Użytkownika Strona 20
- Strona / 79
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
19
®
Resetting the configuration
The Wizard IP Plus asks for an unknown admin password
This may occur if the Wizard IP Plus has been previously configured. If the
existing admin password cannot be discovered, then your only recourse is to
perform a factory reset.
To invoke a configuration reset by switch
1 Remove power from the Wizard IP Plus unit.
2 At the rear of the Wizard IP Plus, adjacent to the power input socket, click
mini switch 1 to its ON (down) position.
3 Re-apply power to the Wizard IP Plus. On the locally connected monitor you
should see a Maintenance menu:
Wizard IP Plus Maintenance
Reset Configuration
return to normal operation.
Configure Network
Put option switch 1 up to
To upgrade unit, visit:
http://192.168.42.154
Wizard IP Plus Reset Config
DO YOU WISH TO CONTINUE?
CancelRESET
WARNING: Continuing will cause
your existing configuration to
be erased.
The unit will then reset and
require re-configuring before
it can be used.
4 Select the ‘Reset configuration’ option.
A warning screen will be displayed. Select the RESET option and press .
5 Remove power, return the mini switch 1 to its OFF position and then re-
apply power. The locally connected monitor should display the first screen of
the initial configuration sequence.
The Wizard IP Plus does not display the configuration sequence
If the Wizard IP Plus has been previously configured it may not automatically
display the first of the setup screens. In this case you have two options, either:
• Access the Unit, Network and Serial configuration screens separately, or
• Reset the configuration:
To invoke a configuration reset by main menu
1 Using the locally connected keyboard and screen, log on as the admin user.
2 Select the ‘Configuration’ option.
Wizard IP Plus Configuration
Reset Configuration
Back
Modem Configuration
Network Configuration
Unit Configuration
3 Highlight the ‘Reset configuration’ option and press .
A warning screen will be displayed, select the RESET option and press .
Wizard IP Plus Reset Config
DO YOU WISH TO CONTINUE?
CancelRESET
WARNING: Continuing will cause
your existing configuration to
be erased.
The unit will then reset and
require re-configuring before
it can be used.
4 The Wizard IP Plus will reset and then display the first of the four initial
configuration screens.
- ServSwitch 1
- Wizard IP Plus 1
- Contents 2
- Further information 3
- Introduction 4
- BLACK BOX 5
- What’s in the box 6
- Installation 7
- Connections 8
- Host computer links: Video 9
- Host computer links: Audio 10
- 11
- 11
- 11
- IP network port 13
- Modem/ISDN port 14
- Power supply connection 14
- Power control port 15
- > > > 16
- Encryption settings 18
- Resetting the configuration 20
- Part 2 – Remote configuration 21
- Networking issues 22
- Power switching configuration 25
- Pxy=z\0D 25
- The KVMADMIN utility 26
- Performing a flash upgrade 27
- Operation 28
- Remote connections 29
- Local connection (continued) 29
- The menu bar 31
- When using the viewer window 31
- Host selection 32
- Configure 32
- Mouse pointers 32
- Access mode - shared/private 33
- Power control 33
- Auto calibrate 33
- Re-synchronise mouse 33
- Controls 34
- Viewer encryption settings 39
- Supported web browsers 39
- Unit configuration 42
- Network configuration 43
- Modem configuration 44
- Reset configuration 45
- Clear IP access control 46
- Colour/Encoding 47
- Identities 50
- Load / Save 50
- Encoding and colour level 52
- Security 52
- User accounts 54
- Advanced unit configuration 56
- Time & date configuration 57
- Setting IP access control 59
- Modem port 60
- Host configuration 61
- Hotkey sequences 62
- Port Direct 62
- Logging and status 63
- 192.168.142.154 64
- Security issues with ports 67
- Permissible key presses 69
- Creating macro sequences 69
- Safety information 71
- End user licence agreement 72
- Radio Frequency Energy 73
- Instrucciones de seguridad 75
Powiązane produkty i podręczniki dla Przełączniki KVM Black Box Wizard IP Plus ServSwitchTM
Przełączniki KVM Black Box ACS201A Dokumentacja
(41 strony)
(41 strony)
Przełączniki KVM Black Box 16 port Dokumentacja
(33 strony)
(33 strony)
Przełączniki KVM Black Box KV0004A Dokumentacja
(43 strony)
(43 strony)
Przełączniki KVM Black Box SW619A Dokumentacja
(57 strony)
(57 strony)
Przełączniki KVM Black Box KV1161A Dokumentacja
(22 strony)
(22 strony)
Przełączniki KVM Black Box ACU3009A Dokumentacja
(49 strony)
(49 strony)
© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.061 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji