Black Box LBG1000A-R2 Instrukcja Użytkownika Pobierz pdf (Strona 21)

Manageable Gigabit Switch

User’s Manual 21

Console Port Configurations

Step 1: Move to highlight [Console Port] from [Basic Management] screen.

Baud Rate

Step 2: Baud Rate is highlighted. Press <Enter> if you want to change the current console baud rate.

Flow Control

Step 3: Move to highlight Flow Control and press <Enter> if you want to change the current flow control method.

Modem Control

Step 4: Move to highlight Modem Control and press <Enter> to decide a console modem connection, Disabled or

Enabled.

Modem Setup String

Step 5: When a modem connection is enabled, move to highlight Modem Setup String and press <Enter>. Decide

whether you want to use Default or Custom Setup String.

<Note> Default Setup String configures the modem to auto answer. It works for all Hayes compatible modems.

SLIP

Step 6: Move to highlight SLIP and press <Enter> if you want to change it, Disabled or Enabled.

<Note> If you enable SLIP, a message tells you that the console port becomes accessible only through the SLIP protocol after you

logout from the current console screen.

SLIP Address

Step 7: Move to highlight SLIP Address and press <Enter> if you want to set it.

SLIP Subnet Mask

Step 8:When SLIP IP address is entered, move to highlight SLIP Subnet Mask and press <Enter>. Enter a suitable

subnet mask.

<Note> You must enter a SLIP address before you can enter a SLIP subnet mask.

Return to Basic Management

Step 9: Press <Esc> to return to [Basic Management] screen when completed.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 73 74

Brak uwag

Black Box LBG1000A-R2 Instrukcja Użytkownika Strona 21