Black Box 5000 Series Przewodnik Instalacji Pobierz pdf (Strona 9)

Light/Medium Duty OBD-II Harness Installation

Connecting to the OBD-II Port

1. With the vehicle’s engine OFF, remove the vehicle’s OBD-II

port. The OBD-II Connector may be hidden behind a hush

panel.

a. To remove the connector, you may need to

remove screws or depress the clips.

2. Connect the Bypass Connector to the vehicle’s OBD-II port

that was previously removed.

3. Attach the Core Connector to the position where the original

OBD-II connector was installed. Secure it with the screws or

clips removed from the OBD-II Connector’s original position

(if applicable).

• 5500 Series units installed with a light duty harness cannot be installed along with lift gates that are plugged into

the OBD port. Refer to the TIB: Lift Gates and Unit Interference.

• If other devices besides the 5500 series unit need to be plugged into the OBD port, please refer to the TIB: Scan

Tool Detection and Aftermarket Devices.

Networkfleet Unit

Core Connector

Bypass Connector

Original OBD-II Port

To Vehicle

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

Brak uwag

Black Box 5000 Series Przewodnik Instalacji Strona 9