Black Box ServSwitch Podręcznik Użytkownika Pobierz pdf (Strona 20)

INSTALLATION

3.2 Interconnection Cable Requirements

To connect the Local and Remote Units you will need CATx (any category 5, 5e, 6 or higher)

cable terminated with RJ45 plugs. Please note that shielded cable is advised to maintain

regulatory EMC compliance.

Interconnect cables must be solid-core type. Stranded patch cable will give poor results over

longer distances. The pairing of the cable and pinning of its connectors should normally be in

accordance with EIA-568B.

Pin* Color

(EIA-568B)

Signal

White/Orange

Orange/White

Blue Video

White/Green

Green/White

Green Video

Blue/White

White/Blue

Red Video

White/Brown

Brown/White

Data

* Looking into the RJ45 socket on a Remote Unit, Pin 1 is on the right and Pin 8 on the left.

EIA-568A wiring can also be used. Contact Technical Support for details.

With some cables, video performance may be improved by using a crossover

patch cable at each end, an alternative RJ45 pin-out or an external skew

correction device (see Appendix C: Advanced Cabling Issues (Skew), page

46).

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 59 60

Brak uwag

Black Box ServSwitch Podręcznik Użytkownika Strona 20