Black Box Advanced Console Server Podręcznik Użytkownika Strona 337

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 392
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 336
BLACK BOX® CS Installation, Administration, and User’s Guide 307
4. Type the IP address of the NTP server in the “NTP Server” field.
5. Click “OK.”
6. Click “apply changes.”
Boot Configuration
Selecting Administration > Boot Configuration in Expert mode brings up the
form shown in the following figure.
Figure 11-8: Expert > Administration > Boot Configuration
Boot configuration defines the location from where CS loads the operating
system. The CS can boot from its internal firmware or from the network. By
default, CS boots from flash memory.
If you need to boot from the network, you need to make sure the following
prerequisites are met.
A TFTP or BOOTP server must be available on the network.
An upgraded CS boot image file must be available on the TFTP or
BOOTP server.
CS must be configured with a fixed IP address.
The boot filename and the IP address of the TFTP or BOOTP server is
known.
Przeglądanie stron 336
1 2 ... 332 333 334 335 336 337 338 339 340 341 342 ... 391 392

Komentarze do niniejszej Instrukcji

Brak uwag